Subscribe to our news letter and enjoy $10 off!
1 9
Sukenari  |  SKU: SUKEN_ZDP_GY210SANMAI

Sukenari ZDP-189 Hairline Gyuto 210mm

$549.95
Tax included Shipping calculated at checkout.
K&S Price: AU $549.95* inc. tax , vs:
Chef Knives to Go US AU $626.69 -14.15%

* For overseas buyers you pay no GST (10%) and low shipping rate.
Last Update: 2024-05-18T01:01:26Z

Detailed Specifications
Line Sukenari ZDP-189 Hairline
Profile Gyuto / Chefs Knife
Bevel Type Double Bevel
Weight 173 g        6.1 oz
Edge Length 205 mm   .8.07 inch
Heel Height 48 mm     .1.89 inch
Width @ Spine 2.6 mm     0.1 inch
Width @ Mid 2.1 mm     0.08 inch
Width @ 1cm from Tip 1.0 mm     0.04 inch
Steel ZDP-189 | Powdered Stainless
Blade Construction Sanmai - Stainless Clad
Hardness (HRC) 63 - 66
Surface Finish Migaki
Handle Octagonal Ebony
Region Toyama
Best for
  • Pro chefs
    		•
    • Free shipping for knives over AU$200 Australia wide.
    • World-wide shipping via DHL Express, 3 to 5 days.


    The Sukenari Hairline series showcases a fine hairline finish, polished to a moderate shine. With the added allure of Sukenari craftsmanship, these knives become versatile options suitable for daily use, showcasing, or treasured heirlooms. Sukenari stands out as one of our cherished knife makers, and these knives exemplify why they are among our top favorites.

    This line boast both exquisite aesthetics and outstanding performance, crafted from ZDP189, one of the toughest alloys utilized in kitchen knife production. With a remarkable hardness ranging from 65-66 HRC, this Powdered Metallurgy steel allows for thinner grinding compared to other steels, while also retaining sharpness significantly longer.

    Encasing the inner core of ZDP189 is a layer of softer stainless steel cladding, facilitating effortless maintenance of these knives. This feature is especially appreciated by professional chefs, enabling prolonged work sessions without frequent blade cleaning or sharpening.

    Pros Cons
  • Excellent performance
  • Great for professionals
    		•
  • Relatively hard to sharpen
    		•

    Care Instruction
    1. Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
    2. Wash with netural detergent after use, and wipe dry;
    3. Please don't wash knife with dishwasher, it will damage the wood handle;
    4. Be careful not to leave the knife close to a heat source for a long time;
    5. It is a lot more dangerous to cut with a blunt knife than a sharp knife!
    6. It is best to sharpen a Japanese knife regularly on a waterstone.

    Sukenari

    Sukenari(佑成), a brand with a trademark written in two Kanji, one is "to support" or can be broken down to "human and its right side", the other one is "become, achieve). According to the current Representative Director Nobuo Hanaki, this name is filled with the desire of making product that will become an inseparable part in the right hand of those who cook.

    Eversince the founding of the company in Showa 8th(1933), Sukenari have been renowned for its products utilizing the hardest manufacturing technique of Honyaki. This applies not only to the traditional carbon steel, but also to modern stainless alloy steels, or even powder metallurgy steels. It is quite safe to say Sukenari, is one of the most, if not the most pioneering Japanese company in terms of new steel selection, with glorious track records of forging with steels never seen on any other kitchen knives.

    • Profile: Gyuto

      Chefs Knife

      A Japanese chef's knife is known as a gyuto (牛刀 ぎゅうとう） gyūtō?), literally meaning 'beef knife'. Its blade resembles a flatter version of a French chef's knife. Japanese cutlery is known for sharpness due to its acute blade geometry, and the hardness of the steel used, sometimes exceeding 60 HRC on the Rockwell Scale A typical western chef's knife may be sharpened to an edge angle of 20-22°, while a Japanese gyuto generally has a sharper edge angle of 15-18° (or even lower), which requires a harder, more brittle grade of steel. In recent years Japanese gyuto have gained in popularity with western chefs.

      A modern chef's knife is a multi-purpose knife designed to perform well at many differing kitchen tasks, rather than excelling at any one in particular. It can be used for mincing, slicing, and chopping vegetables, slicing meat, and disjointing large cuts.

      Slide for more >>

    • Steel: ZDP-189

      ZDP-189 steel is a high-end powdered metallurgy stainless steel renowned for its exceptional hardness and edge retention capabilities. Developed by Hitachi Metals, it contains a high carbon and chromium content, allowing it to achieve hardness levels up to 67 HRC, making it one of the hardest steels used in knife making. This extraordinary hardness means that ZDP-189 can be sharpened to a very fine edge and maintain that sharpness through extensive use, far surpassing many other steel types in terms of edge retention. However, its high hardness also means that it can be more challenging to sharpen and may be more prone to chipping if used improperly. ZDP-189's significant chromium content also provides it with a degree of corrosion resistance, though care should still be taken to maintain the blade. Due to its premium qualities, ZDP-189 is often used in high-end and specialty knives, appealing to enthusiasts and professionals who prioritize cutting performance and longevity.

      Manufacturer:

      • Hitachi Special Steel, Japan

      Nature: Stainless

      Hardness: 63- 66

      << Slide for more >>

    • Construction: Sanmai - Stainless Clad

      Sanmai(Three-Piece) is a common construction for double bevel knives where two pieces of softer cladding steel are forgewelded to each side of a harder core steel. The harder but more brittle core steel will form the hard cutting edge after heat treating, and the softer cladding will support the core to increase the overall strength of the blade.

      The soft cladding enables the thinning process to be a lot easier than a honyaki or monosteel construction. And in the case where the cladding steel are stainless in nature, it can offer protection for the carbon or semi-stainless cores against rusting and discoluoring.

      << Slide for more >>

    • Finish: Migaki

      "Migaki" means "polished" or "shined" in Japanese, The term "Migaki finish" in the context of Japanese kitchen knives indeed does not exclusively refer to a mirror polish but encompasses a broader range of polished finishes that can vary from semi-gloss to a more refined, subtle sheen, rather than a highly reflective surface. The primary goal of a Migaki finish is to enhance the knife's functionality and aesthetic appeal, focusing on a smooth finish that improves resistance to corrosion and minimizes drag during cutting, rather than achieving a purely mirror-like appearance.

      << Slide for more >>

    • Handle Specs

      Profile: Octagonal WA

      Material:

      • Ebony

      This handle, crafted from a single piece of ebony, exemplifies minimalist elegance and functional design. Its unique octagonal shape, featuring a subtle taper, offers a comfortable grip and a visually appealing geometric profile. The ebony wood, known for its deep, rich color and durability, has been meticulously milled from a single block, ensuring a seamless construction that highlights the wood's natural beauty and grain. The handle's surface has been highly polished, achieving a glossy finish that not only enhances the ebony's luxurious dark hue but also provides a smooth, tactile experience for the user. This design choice reflects a minimalist approach, focusing on simplicity, quality, and usability. The combination of the octagonal shape with the taper adds a modern twist to the classic material, making it a standout piece that blends traditional craftsmanship with contemporary aesthetics.

      << Slide for more

    Sukenari

    Sukenari ZDP-189 Hairline Gyuto 210mm

    $549.95

    The Knives and Stones Sukenari ZDP-189 line is truely a beauty by the look, beast by the performance. The core steel is the most advanced powdered steel that Hitachi offers: the ZDP-189, reaching an unmatched hardness of HRC 65 to 67. This is acthieved by over 3% of Carbon content in the steel (White 2 has about 1%, Blue 1 has about 1.25%, that tells you something) meaning the Sukenari ZDP-189 will offer insance edge retention and sharpness. Yet it is a stainless steel because of the added Chromium. Overall, the ZDP-189 has very similar composition to the Cowry-X steel from Daido.

    The ZDP-189 Hairline blade offers similar performance to the Damascus version, with simpler design it also significantly reduces the cost. 

    In order to match the high level fit and finish of the blade, we decided to throw in our K&S custom handles: the ebony, black horn ferrule with nickel-silver spacer handle is a standard among all the K&S Sukenari line.

     

    Measurements 

      Measurements

    Weight 

    		 185 g

    Total Length

    		 349 mm

    Tip to Heel Length

    		 200 mm

    Blade Height at Heel

    		 47 mm

    Width of Spine Above Heel 

    		 2.4 mm

    Width of Spine at Middle of Blade

    		 2.1 mm

    Width of Spine at about 1cm From the Tip

    		 1.0 mm

    Steel

    		 ZDP-189 Powdered Stainless Steel Core

    Hardness

    		 HRC 65-67

    Handle Design

    		 K&S ebony handle with options

     

    View product

    • In Store Test Cut

      Try before you buy!

    • Check your order status

      Updates & tracking

    • Returns & exchanges

      100% Satisfaction

    • Price-match guarantee

      Our promise to you
    Back to top